Dimension :240 X 100 X 70mm
Application : For standard, advanced server and storage power system power system.
Wattages: 500W
PFC:Active
Description
FSP500-702UC is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 500 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.
Application
For standard, advanced server and storage power system.
Features
80 Plus
Low Ripple & Noise
Output over voltage protection
Short circuit protection on all outputs
Resettable power shut down
INTERNAL 4 cm fan
100% burn-in under high ambient temperature(50 degrees )
Vacuum-impregnated transformer
MTBF:100K hours at 25 degrees
100% Hi-pot tested
Line input fuse protection
| Model Name | FSP500-702UC |
| Wattage | 500W |
| Dimension | 240mm (L) times 100 mm (W) times 70mm (H) |
| Product Highlight | Efficiency Level | 80 Plus |
| | Altitude | 2000M |
| General Specification | Effciency | 80% 230VAC |
| | Voltage Regulation | +3.3V, +12V, +5V, +5SB: plusmn5%
-12V: plusmn10% |
| Input Electrical Specification | Input Frequency | 47 ~ 63 Hz |
| | Input Current | 115V@ 10.0 Amps-rms maximum
230V@ 5.0 Amps-rms maximum |
| Output Specification | Hold-up time | 115V/60Hz 16mSec. Minimum@100% Load,
230V/50Hz 16mSec. Minimum@100% Load |
| | Ouput Voltage Regulation | +3.3Vdc output : +3.5 Vdc minimum, + 4.5Vdc maximum
+5Vdc output : +5.5 Vdc minimum, + 6.82Vdc maximum
+12Vdc output : +13.4 Vdc minimum, + 15.6Vdc maximum |
| | Ripple & Noise | 115V-rms/230V-rms 5V 20ms Maximum
115V-rms/230V-rms 12V 20ms Maximum |
| | Over current protection | 3.3V:50mV p-p
5V:50mV p-p
12V1:120mV p-p
12V2:120mV p-p
12V3:120mV p-p
-12V:120mV p-p
5Vsb:50mV p-p |
| Environmental Requirement | Temperature Range | Operating : 0 to +50 degrees
Storage :-20 to +80 degrees |
| | Humidity | Operating : 85% to % RH, Non-condensing
Storage : 95% to % RH, Non-condensing |
| | MBTF | The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25 degrees, 75% output load, and nominal AC inout voltage |
| Safety | CE,FCC,TUV,UL/cUL |
Output Voltage and Current Rating
| | +3.3V | +5V | +12V1 | +12V2 | +12V3 | -12V | +5Vsb |
| Ripple-Noise(R-P) mV | 50mV | 50mV | 120mV | 120mV | 120mV | 120mV | 50mV |
| Regulation Load % | plusmn5% | plusmn5% | plusmn5% | plusmn5% | plusmn5% | plusmn10% | plusmn5% |
| Output Max.(A) | 24A | 20A | 15A | 15A | 15A | 0.5A | 2.5A |
| Output Min.(A) | 0.5A | 0.5A | 1A | 1A | 1A | 0A | 0A |
Note
- 5V, 3.3V, 12V, -12V Will have the regulation to 10% when all load take off.
- The +3.3V and +5V total output shall not exceed 150 watts.
- Maxmum continuous load combined 12V shall not exceed 35A
- The total output shall not exceed 500 watts
